Heavy algae blooms are removed in most ponds within 5 days, keeping the pond algae free. This means water clarity is improved while reducing pond maintenance. Each unit is compact, durable, easy-to-install and energy efficient.

The most efficient flow rate is 50% of total pond volume. The UV Clarifier is not submersible and should be brought in during the winter months when temperatures are at or below freezing.

Water is drawn into a thick layer of coarse material which traps large debris from pond water. A second layer of finer, carbon-impregnated material further purifies the pond water as it passes through.

The powerful, compact maga-drive pump is used to draw water through the filter. This energy efficient design uses one moving part and uses about half the electricity of similar-output pumps.

• Model 190: 190GPH Capacity, pumps 5 ft high, for ponds up to 400 gal, 1 FREE Fountain kit, 10 Ft cord
• Model 1250: 250GPH Capacity, pumps 7 ft high, for ponds up to 600 gal, 2 FREE Fountain kits, 10 Ft cord
• Model 1350: 350GPH Capacity, pumps 10.5 ft high, for ponds up to 800 gal, 2 FREE Fountain kits, 18 Ft cord
• Model 1500: 500GPH Capacity, pumps 10.5 ft high, for ponds up to 1000 gal, 2 FREE Fountain kits, 18 Ft cord
• Model 1700: 700GPH Capacity, pumps 12.5 ft high, for ponds up to 1250 gal, 2 FREE Fountain kits, 18 Ft cord

The revolutionary Coralife Turbo-Twist flow design features a quartz glass sleeve with a PL compact fluorescent UV lamp surrounded by a revolutionary "Turbo-Twist" flow design to increase dwell time without elongating the size of the unit, which in turn increases efficacy in a smaller package.

Continuous ultraviolet sterilization of your water eliminates single-cell algae for crystal-clear ponds and also eradicates most harmful microorganisms on the initial pass through the chamber. Its triple-treatment time fully utilizes all the available UV output of the lamp and ensures that disease-causing pathogens cannot reproduce, thus decreasing the possibility of a disease outbreak in your system.

Features at a Glance:
• Easy in-line installation
• Twist water-flow increases contact time
• Destroys algae cells
• Destroys disease-producing pathogens
• Requires less energy
• Is smaller in size

The 2000, 3000, 6000 and 9000 gallon models are available featuring Powerclenz - the patented automatic cleaning device, which enables the pond filters to be cleaned with just the twist of a knob (details below).

The surface skimming action of the Tetra Pond Skimmer removes leaves, pine needles, grass clippings and other debris before it sinks to the bottom of your pond. They are also creatively hidden in your landscape. Skimmers act as a prefilter to pumps and other filters by removing solids before they can reach and clog the pump or second filter ( biological and / or mechanical filter).

The TetraPond Pond Skimmer can be installed directly in ponds or water gardens. Flip-top cover allows easy access for convenient skimmer maintenance. Great for ponds with flexible liner and preformed ponds.

Tetra Pond Skimmer Features:
• Compact pond skimmer boasts versatile pond installation
• Unique in-pond installation eliminates the need to cut liner
• Removable filter basket for easy pond skimmer maintenance
• Measures 12" x 11" x 9-3/4" high
• For ponds up to 1,000 gallons.

While the filter rests out of sight on the bottom of the pond, the non-obtrusive skimmer floats just below the water surface. Skimmer removes pollen, acorns, leaves, and other debris from the surface so no ugly build-up occurs.

Pondmaster Pond Filters / Skimmers Features:
• Suitable for ponds up to 2000 gallons
• Skims debris off of top, middle, and bottom of pond.
• Flow control ring in cover of filter directs water to skimmer or filter
• Coarse polyester media provides mechanical filtration (included)
• Reticulated Foam Media provides biological filtration (included)
• Versatile design accepts media such as stone, ceramics, and lava rock.
• Convenient handle for taking filter out of water
• No liner cutting or major pond alterations necessary
• Outlet requires 3/4" tubing
• Minimum pump requirement is half the pond volume filtered each hour. (ie: 1000 gal pond requires a minimum of 500 gph pump) Use larger pump than minimum recommended size if adding fountains, waterfalls, or other decorative devices.

Skimmer Ultraviolet Clarifier Features:
• Extremely Compact Footprint Fits in the Smallest of Skimmer Chambers
• Fitted with 1-1/2" MPT Inlet and Outlet to Adapt Easily to Most 1-1/2" Pumps
• Included Diverter Valve Regulates Water Flow thru UV
• Includes 2 Couplings, Rotating Union and O Rings
• Includes UV Lamp, quartz sleeve and Transformer with 18ft Long 115V power cord
• 1 Year Limited manufacturer's warranty .

Models designed to handle the clarifying needs of ponds up to 6,000 gallons.
• EUD02915 for ponds up to 1500 gallons to clean green water.
• EUD02925 for ponds up to 3000 gallons.
  Category: Pond Filters to clean green water..
• EUD02945 for ponds up to 6000 gallons to clean green water.

The joy of never having to see the leaves and debris on the top of your pond and never having to net or drag them out is priceless.

Pondmaster Pro5000 Pond Skimmer Features:
• Strong cylindrical-shaped housing that resists side cave ins
• Made from heavy-duty high-density polyethylene
• Anchoring feature holds skimmer in place when buried
• Large adjustable 11" x 7" weir door for maximum skimming with fish save wings
• Can fit up to two pumps to feed two waterfalls from the same skimmer
• Large capacity clog-resistant leaf basket that keeps debris away from the pump
• Accommodates most pumps up to 8,000 GPH
• Can be used for all ponds up to about 5,000 gallons
• Maximum bulkhead placement versatility with fittings for 1½" and 2" flex tubing
• Reinforced skimmer lid, strong enough to stand on
• For maximum cleaning, use with the Pondmaster Pressurized filter system or other high-quality filter.
• The Pondmaster Pro 5000 Skimmer skims ponds with a surface area up to 800 sq ft.
• Weighs 18 lbs. Weir opening 11" x 7". Unit is 26"L x 24" W x 23"H

Tetra FK6 Pond Filter Kit with Pump & Fountain Accessories Features:
• Fountain Assembly Includes 3 fountain heads; swivel adjuster to level fountain heads; diverter assembly with fittings; adjustment value for regulating flow
• Pre-Filter Includes coarse and fine pad. Tubing and fittings for pump connection included.
• Submersible Pump 325 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology.

Convenient and budget-friendly pond filter kit includes a 325 gph submersible magnetic drive pump with foam filter, a fountain set (Spray, Bell and Frothy pattern), diverter assembly, plus tubing and fittings for fast and easy installation.

Tetra Pond Filter Kit Features
• Includes everything needed for complete filtration of small to mid-size ponds
• Reduces pump and fountain clogging for cleaner, clearer water.
• For ponds under 100 gallons

Simply pump the water from the pond into the container. Pond water will be filtered as it passes out of the container and aerated as it falls over the edge and back into the pond.

There are several configurations for set-up depending on how much work you want your system to do:


1. BEST: Pro Skimmer pulls leaves and debris off the top of the pond. It sits at the edge of the pond at surface height. It contains a submerged pump to move water out of the skimmer. From there, water goes through a pond filter with UV, out to the back of the waterfall, is filtered again and aerated as water spills over the edge back into the pond. This is a truly maintenance-free system with crystal clear water.
   
   
2. GOOD: From submerged pump through filter with UV, out to the back of the waterfall where it is filtered again and aerated as water spills over the edge back into the pond. No leaf skimmer, but excellent filtration.
   
   
3. OK: From submerged pump to the back of the waterfall where water is filtered and aerated as water spills over the edge back into the pond. No leaf skimmer, no primary filtration. No UV sterilizer. Moderate filtration and moderate maintenance.

The trickle of water falling into the pond will give you hours of peaceful contemplation and relaxation.

Pondmaster Pro Biological Pond Filters and Falls Features:
• Extra-wide spillway for greater aeration
• Open swirl chamber for even and efficient water flow through the filter media
• 3 separate filtering actions for super-clean water
• Easily buried in ground to hide canister from sight
• Extra-large capacity designed to increase biological filtration
• Clean once a year under normal use.

Pondmaster Pro Biological Pond Filters and Falls Dimensions:
• Pro 3000 18"L x 10"W x 10"H; Opening is 16"; Container Capacity is 4 gallons; Weighs 3 Lb
• Pro 5000 18"L x 18"W x 20"H; Opening is 18"; Container Capacity is 12 gallons; Weighs 10 Lb

Boost biological filtration in ponds up to 1,000 gallons with a beautiful waterfall. This unit does double duty as an attractive waterfall feature and an efficient biological pond filter.

Unfiltered pond water is directed up and through the included mechanical filter mat and into the bio-media chamber for improved water clarity and quality. In addition to mechanical and biological filtration, the Tetra Pond Waterfall Filter provides beneficial water movement and active aeration to establish a healthy pond environment and to discourage mosquito breeding.

Tetra Pond Waterfall Filter Kit Features:
• Waterfall filter for ponds and water gardens up to 1,000 gallons
• Beautiful waterfall enhances aeration and biological pond filtration
• Efficiently breaks down toxic ammonia and nitrite in pond water
• Measures 19-1/4" x 11-3/4" x 12-1/4" high.
• Great for new pond construction

Tetra FK3 Pond Filter Kit with Pump & Fountain Accessories Features:
• Fountain Assembly Includes Comes with 3 fountain heads and a swivel adjuster to level the fountain heads, Diverter assembly, which fits 1 inch, .75 inch, or .5 inch ID tubing (includes fittings), Adjustment valve that regulates the flow to the fountain head and/or the auxillary water feature.
• Pre-Filter Keeps Comes with a foam insert, Threads directly into the pump inlet
• Submersible Pump 325 GPH 325 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology. Energy-efficient

Convenient and budget-friendly pond filter kit includes a 325 gph submersible magnetic drive pump with foam filter, a fountain set (Spray, Bell and Frothy pattern), diverter assembly, plus tubing and fittings for fast and easy installation.

Tetra Pond Filter Kit Features
• Includes everything needed for complete filtration of small to mid-size ponds
• Reduces pump and fountain clogging for cleaner, clearer water.
• For ponds under 100 gallons

Tetra FK5 Pond Filter Kit Features
• Fountain Assembly Includes 3 fountain heads; swivel adjuster to level fountain heads; diverter assembly with fittings; adjustment value for regulating flow.
• Pre-Filter Keeps small ponds clean. Reduces pump and fountain clogging. Includes coarse and fine pad. Tubing and fittings for pump connection included.
• Submersible Pump 325 GPH at 1 ft (max. puming height 7.2 ft.). Reliable magnetic drive technology. Energy-efficient.
• Limited 3 year warranty

Convenient and budget-friendly pond filter kit includes a submersible flat box Filter, a 325 gph submersible magnetic drive pump, a fountain set (Spray, Bell and Frothy pattern), diverter assembly, plus tubing and fittings for fast and easy installation.

Tetra Pond Filter Kit Features
• Compact fountain filtration kit for ponds up to 250 gallons
• 2-in-1 filter and water fountain kit ideal for pre-formed ponds
• Flat Box Filter also available separately for supplemental pond filtration

Easy-to-install pond filters employ coarse and fine mechanical filter sponges to effectively trap unsightly debris from pond water.

For use with pumps between 200 and 2,000 gallons per hour.